Peter Sedlak
90027 Bernolakovo
Slowakei
Der Verkäufer ist für dieses Inserat und dessen Inhalte verantwortlich.
Q Acoustics Q Acoustics Concept 40 floorstanding loudspeakers white gloss (1 pair) - used, like new
Preis: 899,00 €
| Gebrauchtgerät
Produktdetails
- Produktgruppe
- Standlautsprecher
- Hersteller
- Q Acoustics
- Funktion
- einwandfrei
- Alter
- 1 Jahre 1 Monate Nach Schätzung
- Gebrauchszustand
- gebraucht
- Optik
- neuwertig
- Zubehör
- komplett ohne OVP
- Preis
- 899,00 €
- Weitere Informationen
- http://www.qacoustics.co.uk/
- Seriennummer
- QA C40W
Beschreibung
Award-Winning Floorstanding Speakers
Ultra-Low Resonance Cabinet Design
Floorstanding Speakers
Key Features
The Concept 40 is Q Acoustics' flagship floor-standing speaker delivers an unparalleled sonic performance. The Concept 40's extraordinary soundstage, dynamics and sheer musicality is achieved by incorporating its bespoke drive units into a 'GelcoreTM Construction' cabinet which allows the drive units to perform at their very impressive best.
Enclosure Type: 2-Way Reflex with Double Woofer, Bass Unit: 2 x 125mm, Treble Unit: 25mm, Frequency Response (+/- 3 dB): 53Hz - 22kHz, Nominal Impedance: 8ohm, Minimum Impedance: 4ohm, Sensitivity: 90dB, Crossover Frequency: 2.3kHz
In common with the Concept 20, its award-winning sibling, the Concept 40's extraordinary soundstage, dynamics and sheer musicality is achieved by incorporating its bespoke drive units into a GelcoreTM Construction cabinet. This State-of-the-Art, ultra-low resonance and beautifully lacquered cabinet design allows the dual 125mm drive units and wide dispersion 25mm tweeter to perform at their very impressive best. The combination of high sensitivity for dynamics and increased bass extension for realism make the step up from bookshelf speakers, worthwhile.
The Concept 40 uses GelcoreTM Cabinet Construction, where two layers of MDF, are separated by a bespoke, resonance absorbing, non-setting adhesive which converts the kinetic energy and disperses it as heat. This substantially reduces distortion and allows the individual drive units to deliver their optimal performance; a pure and uncoloured sound.
Beautifully Finished Floorstanding Speakers
Simple to Drive, Simple to Position
With 90dB sensitivity and a nominal impedance of 8 ohms, the Concept 40 is easily driven by any good quality amplifier, providing effortless peaks and crescendos in music and movie soundtracks. Various locations for positioning the speaker in the listening room are catered for by providing a foam bung which can be inserted in the rear-mounted reflex port modifying the bass response to suit positioning against a rear wall or close to a corner.
Gloss Finished Floorstanding Speakers
Stunning to Hear, Stunning to See
These striking floorstanding loudspeakers are available in multi-layered lacquered black or white finishes. The elegant tripod stand allows the Concept 40 to achieve perfect rigidity and floor contact, which further enhances its performance. Even the speaker's attractive brushed aluminium facia plate is not purely decorative. It's part of an assembly, which clamps a butyl rubber sheet to the front panel to reduce cabinet resonance still further in the panel facing the listener.
Specifications:
Enclosure type: 2-way reflex with double woofer
Bass Unit: 2 x 125mm
Treble Unit: 25mm
Frequency Response: 53Hz - 22kHz
Nominal Impedance: 8ohm
Minimum Impedance: 4ohm
Sensitivity: 90dB
Recommended Power: 25 - 150w
Crossover Frequency: 2.3kHz
Dimensions H/D/W mm: 972 x 170 x 288
Weight: 18.5kg
Sold in: Pairs
Finishes available: Lacquered Black Gloss / Lacquered White Gloss
Warranty: 5 Years
What's in the boxes?
2 x Concept 40 Floorstanding Speakers
2 x Speaker Grills
2 x Glass Floor Outrigger Stands
8 x Outrigger Stand Screws
4 x Floor Spikes
4 x Floor Spike Locking Nuts
8 x Rubber Spike Protectors
4 x Bi-wire Linking Plates
2 x Port Bungs
1 x Manual
Ultra-Low Resonance Cabinet Design
Floorstanding Speakers
Key Features
The Concept 40 is Q Acoustics' flagship floor-standing speaker delivers an unparalleled sonic performance. The Concept 40's extraordinary soundstage, dynamics and sheer musicality is achieved by incorporating its bespoke drive units into a 'GelcoreTM Construction' cabinet which allows the drive units to perform at their very impressive best.
Enclosure Type: 2-Way Reflex with Double Woofer, Bass Unit: 2 x 125mm, Treble Unit: 25mm, Frequency Response (+/- 3 dB): 53Hz - 22kHz, Nominal Impedance: 8ohm, Minimum Impedance: 4ohm, Sensitivity: 90dB, Crossover Frequency: 2.3kHz
In common with the Concept 20, its award-winning sibling, the Concept 40's extraordinary soundstage, dynamics and sheer musicality is achieved by incorporating its bespoke drive units into a GelcoreTM Construction cabinet. This State-of-the-Art, ultra-low resonance and beautifully lacquered cabinet design allows the dual 125mm drive units and wide dispersion 25mm tweeter to perform at their very impressive best. The combination of high sensitivity for dynamics and increased bass extension for realism make the step up from bookshelf speakers, worthwhile.
The Concept 40 uses GelcoreTM Cabinet Construction, where two layers of MDF, are separated by a bespoke, resonance absorbing, non-setting adhesive which converts the kinetic energy and disperses it as heat. This substantially reduces distortion and allows the individual drive units to deliver their optimal performance; a pure and uncoloured sound.
Beautifully Finished Floorstanding Speakers
Simple to Drive, Simple to Position
With 90dB sensitivity and a nominal impedance of 8 ohms, the Concept 40 is easily driven by any good quality amplifier, providing effortless peaks and crescendos in music and movie soundtracks. Various locations for positioning the speaker in the listening room are catered for by providing a foam bung which can be inserted in the rear-mounted reflex port modifying the bass response to suit positioning against a rear wall or close to a corner.
Gloss Finished Floorstanding Speakers
Stunning to Hear, Stunning to See
These striking floorstanding loudspeakers are available in multi-layered lacquered black or white finishes. The elegant tripod stand allows the Concept 40 to achieve perfect rigidity and floor contact, which further enhances its performance. Even the speaker's attractive brushed aluminium facia plate is not purely decorative. It's part of an assembly, which clamps a butyl rubber sheet to the front panel to reduce cabinet resonance still further in the panel facing the listener.
Specifications:
Enclosure type: 2-way reflex with double woofer
Bass Unit: 2 x 125mm
Treble Unit: 25mm
Frequency Response: 53Hz - 22kHz
Nominal Impedance: 8ohm
Minimum Impedance: 4ohm
Sensitivity: 90dB
Recommended Power: 25 - 150w
Crossover Frequency: 2.3kHz
Dimensions H/D/W mm: 972 x 170 x 288
Weight: 18.5kg
Sold in: Pairs
Finishes available: Lacquered Black Gloss / Lacquered White Gloss
Warranty: 5 Years
What's in the boxes?
2 x Concept 40 Floorstanding Speakers
2 x Speaker Grills
2 x Glass Floor Outrigger Stands
8 x Outrigger Stand Screws
4 x Floor Spikes
4 x Floor Spike Locking Nuts
8 x Rubber Spike Protectors
4 x Bi-wire Linking Plates
2 x Port Bungs
1 x Manual
Verkäufer:
- Versand aus Slowakei (90027)
- Käufer zahlt Versand
- Versand weltweit
Zahlungsmethoden
- Überweisung
- PayPal
- Vorkasse (Überweisung)
Inserats-ID
5158543269
Angebotszeitraum- Start:
- 11.06.2024 - 13:26
- Ende:
- 10.08.2024 - 13:26
24 mal in 45 Tag(en)