Der Verkäufer ist für dieses Inserat und dessen Inhalte verantwortlich.
Wyred4 Sound mINT integrated amp in near-mint condition with remote and original box
Preis: 800,00 €
| Gebrauchtgerät
Produktdetails
- Produktgruppe
- Vollverstärker
- Hersteller
- Wyred4 Sound
- Funktion
- einwandfrei
- Alter
- 14 Jahre Nach Schätzung
- Gebrauchszustand
- gebraucht
- Optik
- Gebrauchsspuren
- Zubehör
- komplett mit OVP
- Farbe
- Silver and black
- Neupreis
- 1.400,00 €
- Preis
- 800,00 €
- Weitere Informationen
- https://wyred4sound.com/
Beschreibung
Near-perfect condition mINT integrated amp from Wyred4Sound. Extremely well reviewed digital integrated with on-board DAC - which packs a huge punch way beyond its already respectable 100 Watt specification in a small form factor. Extremely musical and capable of driving difficult load speakers with very pleasing results. Great top to bottom coherence, tonal neutrality and snap, with a touch of organic warmth. VERY wide soundstage. USB and digital / coaxial inputs, analogue RCA input, sub out.
Complete with original box in perfect condition and remote. The remote has developed the "sticky plastic" syndrome that affects most of those but is perfectly operational. The amp itself was servied by W4S before it was shipped to me. It effectively marked my introduction to class D - and I'm only selling it because it has been replaced by the much more expensive combination of one W4S m-Pre and 2 mono m-Amps from the same brand.
Any questions pls ask.
Specs :
Typical THD+N 8Ω (10W out): 0.004%
Power Output 8Ω @ 0.2% THD+N: 102W
Power Output 4Ω @ 1.0% THD+N: 187W
IMD (CCIF): 0.0002%
Transient Inter modulation (TIM): 0.003%
Output Idle Noise: < 70µV
Efficiency 4Ω: 81% @ 170W
Efficiency 8Ω: 80% @ 100W
Frequency Response 20Hz-20kHz: ± 0.2db
Lower Bandwidth: 1.5Hz (All Loads)
Dynamic Range: 119db
Gain: 0-33db
Sensitivity: 0.65V
Output Impedance: 0.018Ω
Min Load: 3Ω
Dampening Factor (100Hz 8Ω): >500
Max Output Current: 20A
Channel Tracking: < ± 0.060db
Crosstalk (20Hz-20kHz): >83db
Idle Power Consumption: 20w
Features :
Built-in ESS Sabre DAC
24/96kHz USB input
24/192 Toslink and Coaxial input
No drivers required
2 sets of gold plated unbalanced (RCA) inputs
2 sets of gold plated unbalanced (RCA) outputs (For use with a powered sub, etc.)
100 watt per channel power amp (8 ohms)
Differential design
Headphone amp
Fully functional remote control
12V DC Trigger input (to automatically activate HT Bypass mode)
12V DC Trigger output
Home Theater bypass
Extremely low noise floor
True Resistive-Ladder volume control
Extremely low Idle power consumption
Rugged construction
½” Machined and anodized front panel
66kΩ input impedance
External selectable mains 115/230VAC
Compact size (8”W x3.5”H x 8”D)
9 lbs.
Complete with original box in perfect condition and remote. The remote has developed the "sticky plastic" syndrome that affects most of those but is perfectly operational. The amp itself was servied by W4S before it was shipped to me. It effectively marked my introduction to class D - and I'm only selling it because it has been replaced by the much more expensive combination of one W4S m-Pre and 2 mono m-Amps from the same brand.
Any questions pls ask.
Specs :
Typical THD+N 8Ω (10W out): 0.004%
Power Output 8Ω @ 0.2% THD+N: 102W
Power Output 4Ω @ 1.0% THD+N: 187W
IMD (CCIF): 0.0002%
Transient Inter modulation (TIM): 0.003%
Output Idle Noise: < 70µV
Efficiency 4Ω: 81% @ 170W
Efficiency 8Ω: 80% @ 100W
Frequency Response 20Hz-20kHz: ± 0.2db
Lower Bandwidth: 1.5Hz (All Loads)
Dynamic Range: 119db
Gain: 0-33db
Sensitivity: 0.65V
Output Impedance: 0.018Ω
Min Load: 3Ω
Dampening Factor (100Hz 8Ω): >500
Max Output Current: 20A
Channel Tracking: < ± 0.060db
Crosstalk (20Hz-20kHz): >83db
Idle Power Consumption: 20w
Features :
Built-in ESS Sabre DAC
24/96kHz USB input
24/192 Toslink and Coaxial input
No drivers required
2 sets of gold plated unbalanced (RCA) inputs
2 sets of gold plated unbalanced (RCA) outputs (For use with a powered sub, etc.)
100 watt per channel power amp (8 ohms)
Differential design
Headphone amp
Fully functional remote control
12V DC Trigger input (to automatically activate HT Bypass mode)
12V DC Trigger output
Home Theater bypass
Extremely low noise floor
True Resistive-Ladder volume control
Extremely low Idle power consumption
Rugged construction
½” Machined and anodized front panel
66kΩ input impedance
External selectable mains 115/230VAC
Compact size (8”W x3.5”H x 8”D)
9 lbs.
Verkäufer:
- Versand aus Frankreich (71460)
- Käufer zahlt Versand
- Versand innerhalb EU
Zahlungsmethoden
- Überweisung
- PayPal
Inserats-ID
1217600753
Angebotszeitraum- Start:
- 29.01.2026 - 18:52
- Ende:
- 30.03.2026 - 18:52
17 mal in 2 Stunde(n)
